Precision Hermiston ConcretePrecision Hermiston Concrete

Garage floor concrete in Hermiston OR - a solid slab that wears well under your car

Cracked, dusty or sinking garage floor? We tell you whether it needs a new surface or a new slab, then do the work.

A light gray paver pool deck surrounds a turquoise swimming pool, with metal ladders, lounge chairs, and black pergolas.
  • Licensed and insured.
  • Free in-person estimates.
  • We respond within 1 business day.

Resurfacing or replacing your garage floor

Garage floor concrete in Hermiston usually means one of two jobs. We resurface a sound slab by repairing the cracks and bonding a thin new layer to it, or we replace a failed one by breaking out the old floor and pouring a new reinforced slab that's ready for your car once it cures.

Most calls start with a floor that's cracked, sinking at a corner, chipping by the door or so dusty it tracks into the house. The price mostly turns on whether the old slab can stay or has to come out, how big the floor is and what finish or coating you want, and the schedule turns on the weather and the cure before you park on it. Oregon generally requires anyone paid for construction work on your property, concrete included, to be licensed, and we're licensed and insured. We're based in Hermiston and do the same work in Umatilla, Pendleton, Kennewick and other cities around the area, and at the estimate I walk the floor, measure it and write up what it needs.

  • A straight call on your slab

    I tell you whether your floor needs a new surface or has to come out, and I won't sell you a resurface on a slab that's failed. Satisfaction guaranteed on every job.

  • The person who quotes it runs it

    I come out, measure and write the estimate myself, then run the job on site while my crew does the work, so nothing gets lost between the quote and the pour.

  • Trained where work gets inspected

    I learned concrete on a municipal crew, pouring curb and sidewalk that had to pass a public inspector before I ever worked for a homeowner, and I've run this business since 2017.

How we handle a garage floor job

I start by looking at your slab and telling you straight whether it needs a new surface or has failed and has to come out. For a resurface, we clean out and repair the cracks, then bond the thin overlay so it holds to the old concrete. For a replacement, we break out and haul off the old slab, set the forms so the floor falls toward the door, and lay rebar, the steel inside that holds the slab together if it cracks. In summer we time the pour around the heat, because a slab finished in the midday sun can end up with a weak, dusty top. Then we finish it, usually with a broom finish, a light texture that gives tires and shoes some grip, and cut control joints, shallow grooves that give the slab a planned place to crack, while the concrete is still young. Last comes curing, the wait while the concrete gains strength before it takes weight. If you want a coating later, we plan the new floor around it from the first day.

Garage work often ties into the concrete around it. If you'd like color or a pattern on the floor or the apron, that's our decorative concrete work, and it's worth deciding before the pour. When the garage is cut into a slope and the ground beside the driveway keeps sliding or washing in, we build concrete retaining walls to hold it back.

Garage floor jobs we take on

A slab that has cracked through

When cracks run wide, one side sits lower than the other or a corner has sunk, the slab has usually failed, and a new reinforced floor is the fix that holds.

A worn or dusty surface

If the slab is sound but the top is pitted, flaking or dusting, a resurface repairs the cracks and bonds a new layer on without tearing the whole floor out.

A floor headed for epoxy

If you plan to coat the floor, tell us up front, because we plan the new slab and its finish so the coating has a good surface to bond to later.

An old floor that pools water

If water sits in the middle of the floor or runs back toward the house, the slab is pitched wrong, and a new pour lets us set it so water heads out the door.

Get a free estimate on your garage floor

Send the form and we'll get back to you within one business day to set a time. I come out, measure the floor and write up what it needs, free and with no pressure to book.

  • Your floor size

    Rough measurements, or just whether it's a one-car or two-car garage, give me a sense of the job before I come out, so the visit goes to the details.

  • The cracks you're seeing

    Tell us where it's cracking, sinking or dusting, because that's usually what decides between a resurface and a new slab, and it helps me know what to look at first.

  • Any coating plans

    If epoxy or another coating is in the plans, say so now, because it changes how we plan the floor and when the coating can go on after the pour.

(458) 219-6758

Garage floor questions from Hermiston homeowners

Here's what people usually ask us about resurfacing, replacing, cost, permits, coatings and winter pours on garage floors in Hermiston.

Should I resurface or replace my garage floor?

Resurface it if the slab is sound and only the surface is worn, and replace it if it has failed structurally. Resurfacing repairs the cracks and bonds a thin layer over the old concrete, but it does nothing for problems under the slab. I'll look at yours and tell you straight which it needs.

What does a new garage floor cost in Eastern Oregon?

A 24-by-24-foot garage floor in Eastern Oregon usually costs about $6,000 to $9,000 installed, covering material, labor, forming and a broom finish. That's the area's usual price, not our quote. Size, tearing out an old slab and finish choices move it, so I'll measure yours and write it up at the free estimate.

Will my new garage floor crack like the old one?

Some cracking is normal in concrete, and the goal is to keep it in the joints we cut instead of across the middle of the floor. National floor guidance calls the timing of finishing, jointing and curing critical, because poor timing can lead to cracking, dusting and scaling. Ask us at the estimate how we'll time those steps on your floor.

Do I need a permit to replace a garage floor in Hermiston?

The city's permit list names new garages over 200 square feet, remodels, additions and garage conversions, not a garage floor by itself, so ask the city's Building Department at (541) 667-5025, option #2, about a floor-only job. For residential construction, the city also wants a Blowing Dust Control Plan, naming someone on call 24/7, before work begins. We handle the paperwork our part needs.

How soon can I put epoxy on a new garage floor?

Plan on about four weeks. One epoxy maker asks for 28 days on new concrete, and one resurfacing product has to cure fully, about 28 days, before it's painted, so go by your coating maker's instructions. Tell us about the coating at the estimate, because we plan the new floor with it in mind.

Can you pour a garage floor in winter in Hermiston?

Yes, as long as the new slab is protected. National guidance counts it as cold weather when the air drops to 40°F or is expected to fall below it while fresh concrete still needs protecting, and says concrete placed then gains enough strength when it's mixed, placed and protected properly. I'll explain how we'd protect yours at the estimate.

Get your garage floor looked at

Have the floor size, the cracks you see and any coating plans ready, then call (458) 219-6758 or send the form.

(458) 219-6758Request an estimate