Taking out a bad driveway section
When one section of driveway has cracked or sunk, a straight cut around it lets us break out just that part instead of tearing out the whole driveway.
Need part of a driveway, patio or garage floor cut out for a pipe or a repair? We cut it straight and clean.

Concrete cutting in Hermiston means sawing straight lines or drilling round holes through a driveway, patio, floor or wall, so you can run a pipe, replace a bad section or change a layout without tearing out the whole slab.
Most calls start with concrete that's in the way. You might need a trench for a drain line under the garage floor, a cracked section of driveway taken out, or a patio cut back to make room for something new. What you pay mostly turns on how thick the slab is, how much steel is in it, whether we're cutting flat on the ground or up a wall, and how many feet of cut it takes. The schedule turns less on the sawing than on what has to happen first, like marking buried lines and getting any city sign-off. I come out, measure it and write up what it needs, here in Hermiston and in Umatilla, Pendleton, Kennewick and other cities around the area.
I come out, measure the job and write the estimate myself, and I'm on site running it while my crew cuts. The person who marked the lines is there checking them.
I learned concrete on a municipal crew pouring curb, sidewalk and street patches that had to pass a public inspector, so work along a street or sidewalk is familiar ground.
Oregon generally requires anyone who does construction work on a property for pay to be licensed, and the City of Hermiston wants a business license for work in the city. We're licensed and insured.
I start by walking the job with you and marking where every line goes. Before we cut, we find out what's inside the slab, because hitting steel, a cable or a live line is the one mistake you can't undo. Then we match the saw to the work: a walk-behind saw for a driveway or floor, a saw that rides a track for a wall and a hand saw for tight spots. Near the house we cut wet, so the water holds the dust down instead of letting it drift through open windows and into the garage. Whether we also break out the pieces and haul them off goes on the estimate up front, so you're not surprised by a pile of concrete left in the yard.
Most cuts are the first half of a bigger job. A cracked section that comes out usually goes back in as part of concrete driveway building, and a patio cut back for a new layout often ends with concrete patio construction along the fresh edge. When we pour back into a cut, I'd rather spend your money digging out and packing the ground the new slab sits on, the subgrade, than on a fancier finish, because a patch poured over loose fill usually sinks and cracks along the cut line.
When one section of driveway has cracked or sunk, a straight cut around it lets us break out just that part instead of tearing out the whole driveway.
A new drain or water line under a garage floor or patio needs a narrow trench, and two straight saw cuts keep the edges clean so the patch fits tight later.
When a pipe, vent or conduit has to pass through a slab or foundation wall, a round hole is core drilled instead of sawed, which leaves a clean edge to seal around.
When a patio or walk is in the way of an addition or a new layout, we saw a straight edge where it stops, so what's left looks finished instead of broken off.
Send the form and we'll get back to you within one business day to set a time. I come out, measure the cut and write up what it needs, free and with no obligation.
Driveway, garage floor, patio or wall, and whether it's near the street or sidewalk. Work along the street brings city steps that a cut inside your yard usually doesn't.
A trench for a drain, a section coming out and a hole for a pipe each take a different saw, so a line about the reason helps me plan the visit.
If you have a start and finish in mind, put them down. Locates and any city sign-off need lead time, so knowing your dates lets us plan around them.
These photos show saw-cut edges, patched driveway sections and patio layouts you can point to when we talk through your own job.
Here's what people usually ask before they book a cut, from what it costs to what the city wants first.
Professional concrete saw cutting usually runs about $4 to $15 per linear foot across the US. Reinforced or deeper slabs cost more per foot, wall sawing often runs higher, and on a small job a minimum or trip charge can set the price more than the per-foot rate. Core drilled holes are normally priced apart, so ask to see them on their own line.
Yes, if the cut is in the road, along the sidewalk, on the shoulder or in the ditch, because Hermiston requires a right-of-way permit for any work there. For a cut on your own lot, ask the city about building permits, since its list names remodels, additions and garage conversions, not cutting. We handle the permits and city paperwork our part of the job calls for.
Putting water on the blade cuts down a lot of the dust a concrete saw throws, so ask for wet cutting anywhere near your windows, doors or garage. Hermiston also requires a blowing dust control plan before any residential or commercial construction begins, with someone named who can handle blowing dust or come to the site whenever the city calls, day or night.
If the job includes digging, like a trench for a drain line under the slab, the call to 811 comes first. In Oregon, the Oregon Utility Notification Center is contacted through 811 at least two full business days and no more than 10 business days before excavation. That window often decides the earliest start date, so it's worth planning around.
A concrete wall can be cut with a saw that rides a mounted track, but a wall that carries weight needs more than a saw. One field guide on concrete cutting puts an engineer in charge of any structural opening, so that review belongs in the plan for a cut through a load-bearing wall. Very thick or heavily reinforced walls may need a wire saw instead.
Call (458) 219-6758 or use the form, and I'll come measure the cut myself so the price you get matches the concrete you actually have.